Walk-behind concrete laser levelling machine with Topcon laser generator, AC servo control and 2.6 m working length, holding ground flatness within 2 mm on industrial floor pours.
Price range ₹13,50,000 – ₹14,85,000
Ex-works Delhi. Delivered price for Chennai on request.
The LS-325 walk behind laser guided levelling machine is supplied to industrial flooring contractors in Chennai who need a certifiable flatness rather than a floor that looks level. It runs Topcon laser control over a 2.6 m working length and holds ground flatness to about 2 mm, with elevation error inside roughly 7 mm over 100 m.
Output is 200 to 350 square metres an hour, and realistically 800 to 1000 square metres in a working day once setup, calibration and concrete supply are counted.
At 230 kg it works around columns, into bays and through doorways. A large stand-on machine covers more open area, but on the warehouse extensions, factory bays and cold storage rooms typical of Chennai and Tamil Nadu projects, the LS-325 finishes more square metres in a day precisely because it can get into the shape of the pour.
A levelling machine only holds flatness if it is calibrated against a correctly set laser and the operator understands slope adjustment. We commission on your Chennai slab, calibrate against your instrument and train the operator before handover.
Delivered from Delhi with Numbal coordinating commissioning and service. Blades, wear parts and Topcon consumables are held in Delhi so a flooring programme does not stop waiting on a shipment.
| Specification | LS-325 |
|---|---|
| Engine Model | Honda GX200 Engine |
| Package | Box 1: 2700*1050*1350mm Box 2: 2900*750*920 |
| Laser Generator | Topcon |
| Laser Receiver | Dynamic |
| Control System | AC SERVO System |
| Driving System | PHASE (Italian) (steeples adjustment, turning faster than 1:2:5) |
| Airframe Adjustment | Level sensor automatic adjusting system |
| Slope Working | Single Phase Slope Automatic Adjustment |
| Wheel Tyre | 733nm ATV (1.8-2.2BAR) / 3.0-21 narrow tyre (1.6-2.1BAR) |
| Vibrating System | Eccentric Vibration Motor, 300Hz |
| Centrifugal Force | 100 Kgs |
| Vibrating Plate | Aluminium Alloy |
| Scraper Blade | Aluminium Alloy |
| Scraper Adjustment | Computer Control, Automatic Adjustment |
| Working Length | 2.6M |
| Reverse Speed | 2.5Km/H |
| Min. Ground Clearance | 355mm |
| Ground Flatness | ≤+2mm |
| Ground Elevation Error | ≤+7mm/100m |
| Max Working Radius | ≤200mm |
| Working | 200m²/h - 350m²/h |
| Efficiency | 800-1000 sqm²/day |
| Dimension (L*W*H) | 2748*2900*2044 |
| Weight | 230Kgs |
Specifications as published in the Topall Impex catalogue. Configurations can vary.
LS-325 ke saath overall experience strong raha. Machine ke saath Topall ka technical support bhi important factor tha. Precision flooring jobs ke liye achha equipment laga.
Machine ka precision hamare industrial floor projects mein important tha aur LS-325 ne requirement meet ki. Commissioning ke baad operators confidently machine chala rahe hain.
Large manual screeding team ke comparison mein workflow more systematic hua. Laser guidance ki wajah se level maintain karna easier laga.
Warehouse slab project mein LS-325 ka use kiya. Flatness maintain karne mein machine kaafi useful rahi aur finishing process better controlled raha.
Machine advanced hai, isliye initial learning curve tha. Topall team ne commissioning ke time operation practically samjhaya, uske baad work smooth raha.
Walk-behind format confined industrial spaces ke liye kaafi convenient hai. Traditional manual levelling ke comparison mein consistency improve hui.
LS-325 lene ka main reason slab flatness improve karna tha. Proper setup ke baad levelling process much more controlled ho gaya. Operator training bhi useful rahi.
Tell other contractors how this machine performed on your site.
