Electric concrete placing boom: 12–14 m radius, 360° slewing, 125 mm pipe, 1–5 m spreading height, 415 V three phase, 1200 kg.
Starting from ₹7,00,000 Plus GST. Ex-works Delhi.
Today's price ₹7,00,000 Ex-works Delhi. Final price depends on configuration.
Not sure this is the right size?
Tell us the material, the area and the specification you have to meet. We will tell you which machine fits — and which one is more than you need.
The HGD12 is an electric concrete placing boom that distributes pumped concrete across a slab from one fixed position. It slews through 360° with a placing radius of 12–14 m, carries a 125 mm concrete pipe and spreads concrete at a height of 1–5 m. Two 0.75 KW motors run it on a 3 phase, 415 V, 50 Hz supply, and the machine weighs 1200 KGS.
It does not pump concrete itself. It takes the line from your stationary pump and does the job the pipe gang would otherwise do: moving the discharge point around the slab. At a 12–14 m radius, one setting covers a circle roughly 24 to 28 m across.
Buyers are contractors pouring repeated floor slabs on residential and commercial towers with a stationary pump, where hauling pipe over the reinforcement on every pour costs time and disturbs the steel.
Without a boom, every change in pour position means uncoupling, carrying and re-coupling pipe across the mesh, with a gang of workers doing little else. The HGD12 replaces that with one operator swinging the boom to the next bay. Compared with a truck-mounted boom pump, it needs no access road beside the building, and it belongs to the site, so it is there for every pour rather than booked by the day.
In this range its companion is the ZLP 800 suspended platform, which takes over on the facade once the structure is complete.
The 12–14 m radius and 360° slew decide how many positions a slab needs, so plan the pour around them: fewer moves means fewer cold joints and a faster pour. The 1–5 m spreading height lets the discharge clear column starter bars and edge formwork, and the 4 m mast section sets the boom above the working level. The pipe is 125 mm, a common concrete pump line size; confirm your pump's line before ordering.
Two 0.75 KW motors on 415 V three phase keep running costs low and mean there is no engine and no exhaust on the slab. Plan a three-phase point at slab level on each floor the boom will work from.
Delivery, commissioning on your slab with your pump connected, and training for the boom operator. Spares are held in Delhi.
| Specification | HGD12 |
|---|---|
| Radius of Placing Boom | 12–14 m |
| Concrete Spreading Height | 1–5 m |
| Slewing Range | 360° |
| Motor Power | 2×0.75 KW |
| Diameter of Pipe | 125 mm |
| Overall Machine Weight | 1200 KGS |
| Voltage | 3 Phase, 415 V, 50 Hz |
| Mast Section Height | 4 m |
Specifications as published in the Topall Impex catalogue. Configurations can vary — confirm with our team before ordering.
Topall ke machines ka biggest benefit mujhe project productivity mein dikha. Site requirement ke according machine select karne mein team ne support kiya aur installation ke baad operators ko proper briefing mili.
Construction machinery mein purchase ke saath after-sales bhi equally important hota hai. Topall ke case mein commissioning aur operator training properly mili. Spare availability ke baare mein bhi team clear thi, isliye overall experience positive raha.
Humne Topall se different categories ki machines dekhi aur requirement ke according model select kiya. Sales team ne sirf expensive model push nahi kiya, site requirement samajhkar option suggest kiya. Ye approach achhi lagi.
Topall ke saath mera experience sirf machine delivery tak nahi raha. Machine site par commission karna aur operator ko practically samjhana unka strong point laga. Equipment lene ke baad confidence raha ki issue aaye to support available hai.
Tell other contractors how this machine performed on your site.
Other machines that do the same job at a different size or output — useful if this one is more, or less, than your site needs.
