Made-in-India bar cutting machine for 6–32 mm TMT bar, 5 HP motor, 35 cuts a minute, cast body, 400 kg — the value option.
Starting from ₹57,000 Plus GST. Ex-works Delhi.
Today's price ₹57,000 Ex-works Delhi. Final price depends on configuration.
Not sure this is the right size?
Tell us the material, the area and the specification you have to meet. We will tell you which machine fits — and which one is more than you need.
The TCM-42 is a bar cutting machine made in India by Topall Impex for 6 to 32 mm TMT bar. A 5 HP motor at 2880 rpm on 415 V drives it at 35 cuts per minute, the body is a heavy casting, it weighs 400 kg and the long 1978 × 465 × 558 mm bed carries the bar into the blade. It is the value option in our cutting range: the same 32 mm ceiling as the imported GQ40H, built here, priced lower and serviceable anywhere.
It is bought by contractors setting up a first proper bar yard, by yards that have waited too long for imported spares, and by anyone who cuts bar by the tonne and wants the price per cut as low as it goes. At 35 cuts a minute a single operator with a measuring stop keeps a full bending crew supplied.
Made, supplied, commissioned and serviced by Topall Impex from Delhi, with blades, motor and electrical spares held in stock.
Both cut up to 32 mm and both run on 415 V three-phase. The GQ40H is imported with a 3 kW motor at 365 kg; the TCM-42 is Indian with a 5 HP motor and a cast body at 400 kg. From the TCM-42's side the argument is simple: it costs less, it is heavier and therefore steadier under the blade, and every part of it can be repaired in India. Buyers who want an imported build choose the GQ40H; buyers who want the most cutting per rupee choose this one.
The GQ50 is the third option: the same 32 mm range on a 4 kW motor at 480 kg, for yards cutting large bar all shift.
A cast body is the difference between a cutter that stays square after ten thousand cuts and one that does not. The casting absorbs the shock of each shear, keeps the blade gap constant and adds most of the 400 kg that stops the machine walking. It is also why the TCM-42 is heavier than the imported 32 mm cutter.
The rate is set by the crank. Throughput on site depends on feeding, so set up a bar rack on the infeed side, a measuring stop on the outfeed and a helper to clear cut lengths. Cut one bar at a time at the rated diameter.
Delivery, commissioning at site and operator handover on blade setting. Because the machine is made here, blades, belts, contactors and the motor itself are all in stock in Delhi.
| Specification | TCM-42 |
|---|---|
| Cutting Range | 6–32 mm |
| Motor Power | 5 HP |
| Motor Brand | Crompton / Havells / Bharat Bijli |
| Motor Speed / Voltage | 2880 RPM / 415 V |
| Cutting Time | 35 / min |
| Gear Box | Casting Body |
| Weight | 400 kg |
| Dimension | 1978 × 465 × 558 mm |
| Make | Topall (Made in India) |
Specifications as published in the Topall Impex catalogue. Configurations can vary — confirm with our team before ordering.
Topall ke machines ka biggest benefit mujhe project productivity mein dikha. Site requirement ke according machine select karne mein team ne support kiya aur installation ke baad operators ko proper briefing mili.
Construction machinery mein purchase ke saath after-sales bhi equally important hota hai. Topall ke case mein commissioning aur operator training properly mili. Spare availability ke baare mein bhi team clear thi, isliye overall experience positive raha.
Humne Topall se different categories ki machines dekhi aur requirement ke according model select kiya. Sales team ne sirf expensive model push nahi kiya, site requirement samajhkar option suggest kiya. Ye approach achhi lagi.
Topall ke saath mera experience sirf machine delivery tak nahi raha. Machine site par commission karna aur operator ko practically samjhana unka strong point laga. Equipment lene ke baad confidence raha ki issue aaye to support available hai.
Tell other contractors how this machine performed on your site.
Other machines that do the same job at a different size or output — useful if this one is more, or less, than your site needs.
