Dynamic ride-on power trowel with 2440 × 1140 mm working diameter, Dynamic R-999 36 hp engine, 40 litre tank and 435 kg weight.
Starting from ₹6,70,000 Ex-works Delhi. Final price depends on configuration.
Not sure this is the right size?
Tell us the material, the area and the specification you have to meet. We will tell you which machine fits — and which one is more than you need.
The QUM-96 is the largest ride-on power trowel in the Dynamic range: a 2440 × 1140 mm working diameter driven by the Dynamic R-999 engine at 36 hp, with a 40 litre fuel tank and a 435 kg operating weight. It is the machine for contractors whose work is big open floors — logistics parks, distribution centres, factory halls poured in large panels — where the number that decides the job is metres finished per hour.
Against the 24 hp Honda ride-ons the 96 brings half as much engine again and a working width 540 mm greater, so the blades keep their speed under load on stiff concrete late in the window, when a smaller machine starts to labour and the finish suffers.
Topall Impex was the first importer of ride-on trowels into India and is the exclusive India partner for Dynamic. The QUM-96 is supplied, commissioned and supported from Delhi.
The QUM-80 is the Honda GX690 24 HP machine with a 1900 × 915 mm working diameter, 8 blades, 2 pans and 310 kg weight, and for most industrial floors it is the right buy. The QUM-96 steps up to 36 hp, 2440 × 1140 mm and 435 kg, and makes sense only when the extra coverage is used pour after pour. A contractor with one 3000 square metre slab a month is better served by the QUM-80; one finishing that area every week wants the 96. The QUM-78HA sits between them, on the Honda engine at 365 kg with hydraulic angle control.
Trowelling power is used at the end of the window, when the slab has hardened enough that blade friction climbs. The R-999 holds rotor speed through that phase instead of dropping, which is what produces a uniform burnish on the last pass rather than a dull patch where the engine bogged.
At 2440 mm the QUM-96 covers a strip nearly two and a half metres wide on every pass. Fewer passes mean fewer overlaps, and fewer overlaps mean less banding, which is what a flatness inspection finds. The machine is 2540 × 1240 × 1510 mm overall, so plan the access route before the pour.
Delivery, commissioning on your first pour and operator training, with a starting set of blades and pans. Wear parts and R-999 engine spares are stocked in Delhi.
| Specification | QUM-96 |
|---|---|
| Working Diameter (mm) | 2440×1140 |
| Engine Type | Dynamic R-999 |
| Max. Output (Hp) | 36 |
| Weight (Kg) | 435 |
| Dimension (mm) | 2540×1240×1510 |
| Fuel Tank Capacity | 40 ltr |
Specifications as published in the Topall Impex catalogue. Configurations can vary — confirm with our team before ordering.
Topall ke machines ka biggest benefit mujhe project productivity mein dikha. Site requirement ke according machine select karne mein team ne support kiya aur installation ke baad operators ko proper briefing mili.
Construction machinery mein purchase ke saath after-sales bhi equally important hota hai. Topall ke case mein commissioning aur operator training properly mili. Spare availability ke baare mein bhi team clear thi, isliye overall experience positive raha.
Humne Topall se different categories ki machines dekhi aur requirement ke according model select kiya. Sales team ne sirf expensive model push nahi kiya, site requirement samajhkar option suggest kiya. Ye approach achhi lagi.
Topall ke saath mera experience sirf machine delivery tak nahi raha. Machine site par commission karna aur operator ko practically samjhana unka strong point laga. Equipment lene ke baad confidence raha ki issue aaye to support available hai.
Tell other contractors how this machine performed on your site.
Other machines that do the same job at a different size or output — useful if this one is more, or less, than your site needs.
