Screed vibrator with a 2 m or 3 m blade, flexible-shaft drive from a Honda GX35 or imported motor, levelling and compacting in one pass.
Starting from ₹30,000 Plus GST. Ex-works Delhi.
Today's price ₹30,000 Ex-works Delhi. Final price depends on configuration.
Not sure this is the right size?
Tell us the material, the area and the specification you have to meet. We will tell you which machine fits — and which one is more than you need.
The CVS-25 is a screed vibrator: a 2 m or 3 m screed blade in magnesium or alloy, vibrated through a flexible shaft by a Honda GX35 petrol engine or an imported motor, and drawn across the pour on a single handle. When the operator strikes the concrete off to level, the vibrating blade compacts it at the same time. The result is a slab that is level and dense in one pass, without the air pockets and honeycombing that a hand-pulled screed leaves in a stiff or thick mix.
The Honda version needs no site supply at all.
Topall Impex supplies the CVS-25 from Delhi, with the Honda engine serviceable anywhere in India and wear parts in stock, and supports it from Mumbai, Ahmedabad, Hyderabad and Chennai.
A plain hand screed levels; it does not compact. On a 100 mm residential slab with workable concrete that is fine. On a 150 mm or thicker slab, a stiff mix, fibre-dosed concrete or a road section, the hand screed leaves voids beneath the surface that a needle vibrator poked in afterwards only partly closes. The CVS-25 compacts as it levels. If your slabs are thin and your concrete is wet, the hand tools are enough.
The CVS-25 blade is 2 m or 3 m long and one operator pulls it, so its natural work is bays of that width. The FVP219 roller screed paver made in India by Topall Impex spans 3, 5 or 7 m with 3 to 7 needle vibrators and paves up to 300 mm thick. When the work is continuous road or pavement and the mixers arrive faster than a gang can screed, that is the machine; for bays, ramps and awkward pours, the CVS-25 is the flexible tool.
Take the 2 m blade for narrow bays, paths and ramps, and the 3 m blade for wider bays where fewer passes matter. The Honda GX35 drive works anywhere; ask about the imported-motor option when you quote. Rinse the blade and keep set paste off the flexible shaft after every pour, and give the GX35 clean fuel, a clean air filter and oil changes on schedule.
The vibrator with your choice of blade length and drive, the handle, and commissioning on your site with operator instruction. Spares are held in Delhi.
| Specification | CVS-25 |
|---|---|
| Blade Size | 2 m, 3 m |
| No. of Handles | 1 |
| Material of Blade | Magnesium / Alloy |
| Drive Mode | Flexible Shaft |
| Power | Honda GX35 / Imported Motor |
Specifications as published in the Topall Impex catalogue. Configurations can vary — confirm with our team before ordering.
Topall ke machines ka biggest benefit mujhe project productivity mein dikha. Site requirement ke according machine select karne mein team ne support kiya aur installation ke baad operators ko proper briefing mili.
Construction machinery mein purchase ke saath after-sales bhi equally important hota hai. Topall ke case mein commissioning aur operator training properly mili. Spare availability ke baare mein bhi team clear thi, isliye overall experience positive raha.
Humne Topall se different categories ki machines dekhi aur requirement ke according model select kiya. Sales team ne sirf expensive model push nahi kiya, site requirement samajhkar option suggest kiya. Ye approach achhi lagi.
Topall ke saath mera experience sirf machine delivery tak nahi raha. Machine site par commission karna aur operator ko practically samjhana unka strong point laga. Equipment lene ke baad confidence raha ki issue aaye to support available hai.
Tell other contractors how this machine performed on your site.
Other machines that do the same job at a different size or output — useful if this one is more, or less, than your site needs.
