Heavy-duty self-propelled XINGYI grinder: 15 kW / 20 Hp, 800 mm working width, 350–1950 rpm, 556 kg, 220 V and 380 V.
Starting from ₹7,00,000 Plus GST. Ex-works Delhi.
Today's price ₹7,00,000 Ex-works Delhi. Final price depends on configuration.
Not sure this is the right size?
Tell us the material, the area and the specification you have to meet. We will tell you which machine fits — and which one is more than you need.
The 800LE is a heavy-duty XINGYI floor grinding machine with a 15 kW / 20 Hp motor, an 800 mm working width, head speed from 350 to 1950 rpm and self-propelled drive. At 556 kg it puts real weight on the tooling, which is what keeps metal pads cutting through hard aggregate, old epoxy and stubborn laitance on large industrial floors.
Input is printed as 220 V and 380 V, with a 15 kW / 18.5 Hp inverter. The catalogue lists it in the heavy-duty RC range beside the 955LE; its printed drive mode is self-propelled, and we confirm the control configuration with every quotation.
Buyers are industrial flooring contractors, epoxy and PU applicators with warehouse work, and polished concrete firms moving on to large floors. Topall Impex is the exclusive India partner for XINGYI.
The 955LE widens the cut to 955 mm on four 270 mm discs, steps up to 18.5 kW, adds a 39 litre water tank and remote control, and weighs 750 kg. It is the machine for the biggest floors. The 800LE is 194 kg lighter, has the highest printed top speed in the range at 1950 rpm and runs on 220 V as well as 380 V, which matters on sites where a heavy three-phase supply is not ready yet. For most warehouse and factory contracts it is the better balance of output and portability.
Same 15 kW motor and the same self-propelled drive. The GX688-4A cuts 650 mm at 410 kg and is easier to take between levels. The extra 150 mm of the 800LE is about 23 per cent more floor per pass, and the extra weight keeps the cut even on hard floors.
At 350 rpm with full weight the 800LE drives coarse metal pads through coatings and aggregate; towards 1950 rpm it runs fine diamond pads for honing and polishing. The whole grit sequence on an industrial floor stays on one machine, without a second polisher following behind.
Delivery, commissioning on your floor and operator training, including supply checks before the machine starts. Pads and wear parts are held in Delhi.
| Specification | 800LE |
|---|---|
| Motor Power | 15 Kw / 20 Hp |
| Working Width | 800 mm |
| Input Voltage | 220 V & 380 V |
| Invertor Power | 15 Kw / 18.5 Hp |
| Rotating Speed | 350–1950 rpm |
| Drive Mode | Self Propelled |
| Weight | 556 kg |
| Dimension / Packing (cm) | 146×88×132 |
Specifications as published in the Topall Impex catalogue. Configurations can vary — confirm with our team before ordering.
Topall ke machines ka biggest benefit mujhe project productivity mein dikha. Site requirement ke according machine select karne mein team ne support kiya aur installation ke baad operators ko proper briefing mili.
Construction machinery mein purchase ke saath after-sales bhi equally important hota hai. Topall ke case mein commissioning aur operator training properly mili. Spare availability ke baare mein bhi team clear thi, isliye overall experience positive raha.
Humne Topall se different categories ki machines dekhi aur requirement ke according model select kiya. Sales team ne sirf expensive model push nahi kiya, site requirement samajhkar option suggest kiya. Ye approach achhi lagi.
Topall ke saath mera experience sirf machine delivery tak nahi raha. Machine site par commission karna aur operator ko practically samjhana unka strong point laga. Equipment lene ke baad confidence raha ki issue aaye to support available hai.
Tell other contractors how this machine performed on your site.
Other machines that do the same job at a different size or output — useful if this one is more, or less, than your site needs.
