High-capacity CNC stirrup bending machine for 4-12 mm single-wire and 4-10 mm double-wire TMT bar, rated at around 2400 pieces per hour.
Price range ₹34,00,000 – ₹37,40,000
Ex-works Delhi. Delivered price for Hyderabad on request.
The GTD5-12D is the machine for precast yards and infrastructure contractors in Hyderabad working in heavier bar. It bends 4 to 12 mm on single wire and 4 to 10 mm on double at 2400 pieces per hour, holding plus or minus 1 mm on length and 1 degree on angle.
Bending speed runs at 1000 degrees per second against 800 on the GTD4-10S, which is where the extra output comes from.
If your Hyderabad work is building stirrups in 8 mm and under, the GTD4-10S produces the same quality to the same tolerance for well under half the price. Capacity you use twice a year is the most expensive thing on a rebar line. We will say so rather than quote you the larger machine by default.
Rated total power is 32 KW with average running draw near 5 KW. The machine is 3800 x 1140 x 2100 mm and weighs 2000 kg, so it needs a proper foundation slab, decoiler clearance and a stacking area planned before delivery.
At this level the machine is a production line, and downtime costs more than the purchase price ever did. We commission in your Hyderabad yard, train operators on programming, and hold control and drive spares in Delhi with Dhollapally coordinating service across Telangana — because a controller ordered against a container is weeks of stopped production.
| Specification | GTD5-12D |
|---|---|
| Single Wire Bending (mm) | 4-12 TMT Bar |
| Double Wire Bending (mm) | 4-10 TMT Bar |
| Max Bending Angle | 180° |
| Max Traction Speed (m/min) | 80 |
| Max Bending Speed | 1000°/sec |
| Length Tolerance (mm) | ±1 |
| Bending Angle Tolerance | ±1 |
| Average Power Consumption | 5 KW |
| Rated Total Power (KW) | 32 KW |
| Weight (KG) | 2000 |
| Dimension (mm) | 3800 X 1140 X 2100 |
| Productivity | 2400 PCS/hr |
Specifications as published in the Topall Impex catalogue. Configurations can vary.
Topall ke through machine procurement ka experience smooth raha. Installation, operator briefing aur commissioning properly handle hua. Production side se machine ne expectations meet ki.
Large reinforcement requirement ke liye ye model practical raha. Machine ke controls samajhne ke baad operators comfortably handle kar rahe hain.
Automatic stirrup line add karne ke baad manual work ka pressure noticeably kam hua. Machine ko regular shift mein use kar rahe hain aur output stable mil raha hai.
GTD5-12D ka performance hamare larger projects mein achha raha. Production schedule ko meet karna easier hua hai. Machine ke saath operator training ko bhi main positive point maanta hoon.
Machine lene ke baad sabse useful cheez repeatability lagi. Same program par similar bends consistently mil rahe hain. Initial setup mein Topall ki support useful rahi.
Machine ka build proper industrial type ka hai. Pehle stirrup production ke liye multiple people chahiye hote the, ab process much more streamlined hai.
GTD5-12D heavy workload ke liye li thi aur production requirement ke according perform kar rahi hai. Automatic operation se operators ka manual bending load kaafi reduce hua.
Tell other contractors how this machine performed on your site.
