Twin-rotor ride-on power trowel with 24 HP Honda GX690, 8 blades and 1900 x 915 mm working diameter for finishing large concrete floor areas.
Price range ₹3,70,000 – ₹4,07,000
Ex-works Delhi. Delivered price for Mumbai on request.
The QUM-80 ride-on power trowel is supplied to Mumbai flooring contractors finishing large concrete areas where a walk behind machine can no longer keep up with the pour. Twin rotors carry eight blades across a 1900 x 915 mm working width, driven by a Honda GX690 24 HP engine at 120 to 140 rpm.
It weighs 310 kg and carries 12 litres of fuel, which covers a long pour without stopping to refuel at the wrong moment.
Below roughly 500 square metres a walk behind trowel is the sensible machine. Above that the QUM-80 covers ground several times faster, and because the operator sits in one position the overlap stays even. That evenness is the real argument — walk behind work on a large floor leaves banding, and on any Mumbai slab written to a flatness specification, banding is what the specification finds.
Supplied with combination blades and two pans in 3 mm manganese steel. Pans float the slab, blades finish it, and you will use both on the same pour. We hold blades and pans in Delhi so a Mumbai floor programme does not stop for a worn set.
Going on too early brings water and fines to the surface and the floor dusts for years afterwards; too late and the blades will not cut. Our commissioning through Bhiwandi covers reading the slab, not only driving the machine.
| Specification | QUM-80 |
|---|---|
| Blade Quantity | 8 Pcs |
| Pan Quantity | 2 Pcs |
| Working Speed | 120-140rpm |
| Working Diameter | 1900×915mm |
| Engine | Honda GX690 24HP |
| Max Speed | 3600rpm |
| Fuel Tank | 12Ltr |
| Disc Dia | 940mm |
| Spare Parts | Combination Blade |
| Pan | Made of 3mm Thickness, Manganese Steel 2 Pcs. |
| Dimension (mm) | 1980×996×1320 |
| Weight (KG) | 310 |
Specifications as published in the Topall Impex catalogue. Configurations can vary.
Topall se purchase aur commissioning experience smooth raha. QUM-80 ab hamare bigger flooring projects ka regular equipment ban chuki hai.
Machine large slab work ke liye genuinely useful hai. Productivity increase hui aur finishing team ka workload better distribute ho gaya.
Long working hours ke dauran ride-on trowel ka comfort practical laga. Floor finishing ka overall consistency manual method se better control mein raha.
QUM-80 ke saath finishing speed kaafi improve hui. Large warehouse floor par machine ne expected performance diya.
Starting mein machine size dekhkar thoda hesitation tha, lekin large pours mein iska benefit clear hai. Operator ko controls samajhne mein Topall training useful rahi.
Machine ka twin-rotor setup large slab areas ke liye kaafi effective laga. Finish uniform mil rahi hai aur manual trowelling ki dependency reduce hui.
Large concrete floor projects mein QUM-80 ne hamara finishing time kaafi reduce kiya. Ride-on design ki wajah se long shifts mein operator fatigue bhi comparatively kam raha.
Tell other contractors how this machine performed on your site.
