Remote-control XINGYI floor grinder: 18.5 kW, 955 mm on four 270 mm discs, 39 L water tank, self-propelled, 750 kg.
Starting from ₹12,00,000 Ex-works Delhi. Final price depends on configuration.
Not sure this is the right size?
Tell us the material, the area and the specification you have to meet. We will tell you which machine fits — and which one is more than you need.
The 955LE is the largest XINGYI grinder with a printed specification in our range: an 18.5 kW motor driving four 270 mm grinding discs across a 955 mm working width, a 39 litre water tank, and self-propelled drive that can be run by remote control. It weighs 750 kg and runs on 380 V.
Remote control changes the job. The operator stands clear of the machine, watches the floor and the cut rather than a handlebar, and stays out of the dust and slurry. On warehouse floors ground eight hours a day, that is both a productivity argument and a health one.
It is bought by industrial flooring contractors with large warehouse, logistics and factory contracts, and by firms taking on polished concrete at scale. Topall Impex is the exclusive India partner for XINGYI.
From the 955LE's side, the 800LE gives up 155 mm of width, 3.5 kW of power, the water tank and remote operation, in exchange for a lighter 556 kg machine that also runs on 220 V. If your contracts are regularly several thousand square metres, the 955LE covers roughly a fifth more floor per pass and keeps its operator fresher across the shift. If you also work mid-size floors and upper levels, the 800LE is easier to deploy.
Four 270 mm discs spread 750 kg across more tooling, so each pad cuts evenly and the scratch pattern stays uniform across the full 955 mm. The 39 litre tank allows wet grinding: water cools the diamonds and holds dust down during heavy removal. Dry grinding with an industrial vacuum is the alternative where slurry would be a problem.
The TANK 1500 autopilot grinder sits above the 955LE for the very largest floors. It has no printed specification and is quoted on enquiry. For most buyers the 955LE is the largest machine that makes sense.
Delivery, commissioning, and operator training on both self-propelled and remote-control operation. Pads, discs and wear parts are stocked in Delhi.
| Specification | 955LE |
|---|---|
| Motor Power | 18.5 KW |
| Working Width | 955 mm |
| Grinding Discs | 270 mm × 4 |
| Input Voltage | 380 V |
| Water Tank | 39 L |
| Drive Mode | Self Propelled / Remote Control |
| Weight | 750 kg |
| Dimension / Packing (cm) | 177×110×120 |
Specifications as published in the Topall Impex catalogue. Configurations can vary — confirm with our team before ordering.
Topall ke machines ka biggest benefit mujhe project productivity mein dikha. Site requirement ke according machine select karne mein team ne support kiya aur installation ke baad operators ko proper briefing mili.
Construction machinery mein purchase ke saath after-sales bhi equally important hota hai. Topall ke case mein commissioning aur operator training properly mili. Spare availability ke baare mein bhi team clear thi, isliye overall experience positive raha.
Humne Topall se different categories ki machines dekhi aur requirement ke according model select kiya. Sales team ne sirf expensive model push nahi kiya, site requirement samajhkar option suggest kiya. Ye approach achhi lagi.
Topall ke saath mera experience sirf machine delivery tak nahi raha. Machine site par commission karna aur operator ko practically samjhana unka strong point laga. Equipment lene ke baad confidence raha ki issue aaye to support available hai.
Tell other contractors how this machine performed on your site.
Other machines that do the same job at a different size or output — useful if this one is more, or less, than your site needs.
