Branches: Delhi Mumbai Ahmedabad Hyderabad Chennai
Buyer’s guide · Nov 06, 2026 · 4 min read

Concrete Placing Boom or Pipeline: When Does the HGD12 Make Sense?

Concrete Placing Boom or Pipeline: When Does the HGD12 Make Sense?

A concrete placing boom makes sense when you pour slab after slab with a stationary pump and your pipe gang spends every pour uncoupling and carrying pipe across the steel. Our HGD12 takes the end of your pump line and swings it through 360° over a 12 to 14 m radius, so one operator moves the discharge point instead of a crew.

What does a concrete placing boom actually do?

It distributes pumped concrete across a slab from one fixed position. It does not pump concrete itself. The HGD12 concrete placing boom takes the line from your stationary pump and does the job the pipe gang would otherwise do: moving the discharge point around the slab.

So you still need your pump. What the boom replaces is the work of relocating the last lengths of pipeline each time the pour moves, and the way that disturbs the steel.

How does the HGD12 compare with moving the pipeline by hand?

PointPipeline moved by handHGD12 placing boom
Changing the pour positionUncouple, carry and re-couple pipe across the meshSwing the boom to the next bay
People on the discharge endA gang doing little else during the pourOne boom operator
Effect on the steelPipe hauled over the reinforcement on every pourDischarge carried above it, at a spreading height of 1 to 5 m
Reach from one positionAs far as the pipe is laid12 to 14 m radius, 360° slewing
Power on the slabNone2 × 0.75 kW motors, 3 phase, 415 V, 50 Hz
PipeYour pump line125 mm concrete pipe

A truck-mounted boom pump is the other option many contractors consider. It needs an access road beside the building and is usually booked by the day. The HGD12 needs neither: it belongs to the site, so it is there for every pour.

Will a 12 to 14 m radius cover my slab?

From one setting, the HGD12 covers a circle roughly 24 to 28 m across. Check your own slab against that before you order:

  1. Mark where the boom will stand on the slab drawing.
  2. Measure from that point to the farthest edge or corner you need to pour.
  3. Up to 12 m, one position reaches it. Between 12 and 14 m, send us the drawing and we will confirm it. Beyond 14 m, plan a second position or a different standing point.
  4. Count the positions for the whole slab. Fewer moves mean fewer cold joints and a faster pour.

What does the HGD12 need on site?

  • A stationary concrete pump. The boom carries a 125 mm pipe, a common pump line size. Confirm your pump's line before ordering.
  • A three-phase point at slab level. The two 0.75 kW motors run on 3 phase, 415 V, 50 Hz, so plan a supply on each floor the boom will work from. There is no engine and no exhaust on the slab.
  • Height above the working level. The 4 m mast section sets the boom above the slab, and the 1 to 5 m spreading height lets the discharge clear column starter bars and edge formwork.
  • A plan for moving it. The machine weighs 1200 kg overall. Ask us how it should be set up and moved on your structure before the first pour.

Which jobs make a placing boom worth buying?

The HGD12 earns its place where the same kind of pour comes round again and again:

  • Floor slabs on high-rise residential towers poured on a repeating cycle with a stationary pump
  • Commercial, institutional and industrial building slabs
  • Podium and basement roof slabs
  • Sites with no access for a truck-mounted boom pump

The case is weaker for a single slab on a site where a boom pump can park beside the building, because the HGD12's advantage is being on site for every pour. Once the frame is up, its companion in our range, the ZLP 800 suspended platform, takes over for the facade work.

How do I get an HGD12 for my project?

We deliver the HGD12, commission it on your slab with your pump connected, and train your boom operator. Spares are held in Delhi. Full specifications are on the HGD12 electric concrete placing boom page, and the wider range is on our suspended platforms and placing booms page. Tell us your pump, your slab sizes and how many floors you are pouring, and we will tell you whether one boom covers the job.

Free quotation

Get a price for your job

Tell us the material, the area and the specification you have to meet. We will come back with the right machine, the price and the delivery date — usually the same working day.

No spam. Your details are not shared with anyone.

Quality AssuredEvery product meets our highest standards.
Timely DeliveryReliable logistics across India.
Dedicated SupportOur team is here to help you.
Trusted ServiceSupport before and after every order.