Branches: Delhi Mumbai Ahmedabad Hyderabad Chennai
Buyer’s guide · Nov 02, 2026 · 3 min read

Floor Grinding Machine: Single Disc or Planetary, and How to Choose

Floor Grinding Machine: Single Disc or Planetary, and How to Choose

Choose a floor grinding machine by the job first and the floor area second. A single-disc machine suits scrubbing, pad polishing and upkeep of a finished floor. A planetary grinder suits flattening a slab or removing a coating. After that, working width follows the area you must cover in a shift.

What is the difference between single disc and planetary?

A single-disc machine turns one plate. It is simple and forgiving, but the disc follows the hollows in a floor instead of cutting them out, and it can chatter on hard removal. Our 175B and 78K run a 17 inch disc at a steady 175 rpm, which is a speed for pad work, not stock removal.

A planetary head turns satellite discs inside a counter-rotating plate, so the cutting path crosses itself and the machine tracks the high points. If flatness or coating removal is the point of the job, this is the type to buy.

Which machine suits which job?

JobMachineWidthPowerWeight
Upkeep, marble and terrazzo pad work175B17 inch2 HP55 kg
Daily pad work on stone and concrete78K17 inch3 HP78 kg
Edges, stairs and small roomsGT330330 mm4 kW120 kg
Shops, offices and apartmentsGT460460 mm4 kW165 kg
One machine to prepare and polish550-3V550 mm4 kW165 kg
Removal work in rooms and corridors580-2580 mm7.5 kW175 kg
Floors reached by a goods liftGT-630600 mm7.5 kW240 kg
Daily production grindingGX65638 mm9.5 kW305 kg
Thousands of square metresGX688-4A650 mm15 kW410 kg
Warehouse and factory contracts800LE800 mm15 kW556 kg
The largest open floors955LE955 mm18.5 kW750 kg

How do you match width to floor area?

Rooms, corridors and patch repairs are a 330 mm to 580 mm job. Open bays of thousands of square metres need 638 mm or more. Beyond about 800 mm the machine should drive itself, because pushing a 556 kg head by hand is what slows a crew down. For a 2,000 sq m warehouse floor, treat the GX65 as the practical minimum.

Does the job need variable speed?

Coarse metal pads cut best at low speed, while fine resin pads polish at high speed. If one machine must do both, look at a variable head: the 550-3V runs 350 to 1260 rpm and the GX65 runs 350 to 1680 rpm. The 580-2 runs at a fixed 1460 rpm and is built for preparation work.

What should you check on site before ordering?

  • Power supply: most of these machines need 380 V three-phase. The 175B and 78K run on 220 V, and the 800LE is printed for both 220 V and 380 V.
  • Access: measure the goods lift and doors. A heavy machine that cannot reach the floor is no use on that job.
  • Dust: dry grinding makes silica dust. The GT330 and GT460 have vacuum motors built in, but larger machines are sold without extraction, so add a unit from our industrial vacuum cleaner range.
  • Tooling: the pads do the cutting, so ask for the tooling list with the quotation.

See the full range on our concrete floor grinding machine page. Send us the floor area, the current surface and the finish you need, and we will suggest a machine and tooling for it.

Free quotation

Get a price for your job

Tell us the material, the area and the specification you have to meet. We will come back with the right machine, the price and the delivery date — usually the same working day.

No spam. Your details are not shared with anyone.

Quality AssuredEvery product meets our highest standards.
Timely DeliveryReliable logistics across India.
Dedicated SupportOur team is here to help you.
Trusted ServiceSupport before and after every order.