A column ring making machine is what site crews call a stirrup bending machine: the same machine bends the rings that tie column and beam bars. Choose it by the largest ring bar you use and by how many rings your pour schedule demands each day.
Which machines make column rings?
| Model | Type | Bar range | Output | Power |
|---|---|---|---|---|
| GW20 | Operator-fed | 4 to 16 mm | 25 to 30 r/min bending speed | 2.2 kW, 415 V three-phase |
| GW20S | Operator-fed | 4 to 16 mm | 25 to 30 r/min bending speed | 2.2 kW, 220 V single-phase |
| GTD4-10S | CNC automatic | 4 to 8 mm single wire, 4 to 6 mm double wire | About 2,000 pieces an hour | 20 kW rated |
| GTD5-12D | CNC automatic | 4 to 12 mm single wire, 4 to 10 mm double wire | About 2,400 pieces an hour | 32 kW rated |
How do you match a machine to your schedule?
- Count the rings per pour. Multiply the rings in each column or beam by the number of members.
- Divide by the days between pours. That gives your daily target.
- Compare it with the machine. Operator-fed machines suit a few hundred rings a day. Past that, a CNC machine is the practical route.
As an example, a floor needing 6,000 rings would take a GTD4-10S about three hours at its rated output. Allow extra time for setup and coil changes.
Should you choose single-phase or three-phase?
If your yard already has a three-phase supply for the bar bender and cutter, the GW20 sits comfortably on it. If there is no three-phase supply, or the machine moves between small sites, the GW20S runs on 220 V. Capacity, angles and speed are the same on both.
What must you plan for a CNC machine?
- Power: size the supply for the rated figure, not the average running figure. An undersized supply shows up as tripping under peak load.
- Floor: the GTD4-10S weighs 1,300 kg and measures 2600 x 880 x 1700 mm. The GTD5-12D weighs 2,000 kg and measures 3800 x 1140 x 2100 mm. Allow space for the decoiler and for stacking output.
- Training: an automatic machine nobody can programme produces nothing. Installation, commissioning and operator training are included.
Compare all models on our stirrup bending machine page. Spares are held in Delhi.
Get a price for your job
Tell us the material, the area and the specification you have to meet. We will come back with the right machine, the price and the delivery date — usually the same working day.