Size a mini road roller by the layer you are compacting first, then by the width of the lane and the way the machine reaches the site. Our five FVR rollers run from a 280 kg single-drum walk-behind at 15 kN to a 1200 kg ride-on at 50 kN.
How do the five FVR rollers compare?
| Model | Format and drums | Drum (mm) | Centrifugal force | Operating weight | Working speed |
|---|---|---|---|---|---|
| FVR 600S | Walk-behind, single | 430 × 600 | 15 kN | 280 kg | 0 to 4 km/h |
| FVR 650D | Walk-behind, double | 426 × 650 | 25 kN | 530 kg | 0 to 4 km/h |
| FVR 600 | Walk-behind, double | 430 × 600 | 30 kN | 550 kg | 0 to 4 km/h |
| FVR 850 | Ride-on, double | 580 × 700 | 30 kN | 750 kg | 0 to 5 km/h |
| FVR 1200 | Ride-on, double | 540 × 800 | 50 kN | 1200 kg | 0 to 8 km/h |
All five have hydraulic drive and vibrate at 70 Hz. Read force and weight together: weight presses the layer, vibration rearranges it.
Which roller suits which layer?
- Paver bedding, footpaths, kerb lines and small asphalt patches: the FVR 600S. Enough for bedding and thin sub-base; not a base course machine.
- Asphalt paths, parking bays and patch repair: the FVR 650D. The rear drum irons out what the front one moved, so a patch blends in without a ridge at each pass line.
- Soil, granular base, trench lines and approach roads: the FVR 600, where 30 kN does the work in fewer passes.
- Long runs of approach road and yard: the FVR 850. The same 30 kN as the FVR 600 on a wider drum, with the operator seated.
- Base course, large yards and highway work: the FVR 1200, whose 50 kN compacts thicker lifts in fewer passes.
We do not quote a lift depth per model. Set it with a trial strip: roll one lift a fixed number of passes, test it, and adopt whatever meets your specification.
How does the width of the lane change the choice?
Less than you might expect. The second figure in each drum size is the width the drum rolls: 600 mm on the FVR 600S and 600, 650 mm on the 650D, 700 mm on the 850 and 800 mm on the 1200. On your road:
- Measure the lane at its narrowest point, kerb to kerb or wall to wall.
- Divide by the drum width and round up. That is the minimum number of runs to cover the width once, before overlap.
- Multiply by the number of passes your trial strip needs.
On a 3 m lane that gives five runs for the 600, 650 and 700 mm drums and four for the 800 mm drum. Width barely moves the count. What moves output is working speed, up to 8 km/h on the FVR 1200 against 4 km/h on the walk-behinds, and by force, which sets the passes per run.
Will the roller reach the site and turn there?
In colonies and older lanes, access often decides first. The FVR 600S moves on a pickup. The 650D, 600 and 850 load onto a small tipper. The FVR 1200, with a 2100 × 1000 × 1650 mm package, needs proper transport and proper access at site.
The FVR 650D is 300 mm shorter than the FVR 600 yet has the widest walk-behind drum, so it turns at dead ends and gates where the 600 has to shunt. On sloping lanes, the 600S is rated for a 25% grade and the other four for 30%. Treat that as a limit, not a target, on wet slopes.
When is a roller the wrong machine?
Inside a trench, against a wall or around a manhole collar, a plate compactor or rammer does the job a drum cannot. Below roughly a lane width of continuous work, a plate is usually quicker once loading and turning are counted. Our vibratory roller vs plate compactor guide covers that decision.
Which roller should a small contractor buy first?
If one machine has to cover footpaths, patches and approach roads, the FVR 600 is the safer choice: twice the force of the 600S, two drums and electric start. Buy the 600S only when the work stays light. Asphalt patch crews are better served by the FVR 650D.
Specifications for every mini road roller in the FVR range are on one page. Send us the lane width, material and layer, and we will suggest a model.
Get a price for your job
Tell us the material, the area and the specification you have to meet. We will come back with the right machine, the price and the delivery date — usually the same working day.